Pyramid Sounds
Lukk
Handlekurven er tom

Subtotal: 0

Mutable Instruments Warps

Art.nr: MIwarps
2.099

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager kan du legge igjen epostadressen din i skjemaet under.

På lager: 1

Evolved from the oscillator mixing section of Mutable Instruments’ desktop hybrid synths, Warps is designed to blend and combine two audio signals. A variety of wave-shaping and cross-modulation methods – some of them emulating classic analog circuits, some of them purely digital – are provided by the module.

With Warps, the cross-modulated sound can be sculpted with control voltages along 4 dimensions: by controlling the amplitude and distorting the input signals, by smoothly scanning through the collection of modulation algorithms, and by adjusting a timbre parameter controlling the brightness/harshness of the modulated signal.

Since many classic cross-modulation effects work best when the carrier is a simple waveform – for example, a sine wave for ring-modulation or a buzzing waveform for vocoding – Warps includes a digital oscillator offering a handful of classic waveforms. This internal oscillator, which tracks V/Oct and supports through-zero FM, will replace the carrier audio input – freeing up one oscillator in your system for other duties!

Features

  • Continuous morphing between 7 cross-modulation algorithms: crossfade, cross-folding, digital model of analog diode ring-modulation, digital ring-modulation, bitwise XOR modulation, octaver/comparator, 20-band vocoder.
  • Control of timbre richness/brightness.
  • Each audio input has a built-in digital VCA with emulation of analog soft-clipping.
  • Audio input 1 can be replaced by an internal digital oscillator with through-zero FM. Available waveforms: sine, triangle, sawtooth, pulse, filtered noise.

Controls

  • Modulation algorithm morphing.
  • Timbre richness.
  • Input gain/distortion for audio inputs 1 and 2.
  • Internal oscillator waveform.

Inputs and outputs

  • Audio input 1 (carrier) level CV (or internal oscillator 1V/Oct CV), -1V to +8V.
  • Audio input 2 (modulator) level CV, -1V to +8V.
  • Modulation algorithm morphing CV, -5V to +5V.
  • Timbre CV, -5V to +5V.
  • Audio input 1 (or internal oscillator through-zero FM). Modular level expected (up to 15 Vpp).
  • Audio input 2. Modular level expected (up to 15 Vpp).
  • Cross-modulated signal output.
  • Auxiliary output: internal oscillator signal (when enabled) or mix of inputs 1 and 2 (post digital VCA).

Technical characteristics

  • Input impedances: 100k.
  • AD/DA: 16-bit, 96kHz.
  • Internal processing: 32-bit floating point, 576kHz (32kHz for vocoder).
  • Open-source hardware and firmware.
  • Easy firmware updates through an audio interface.
  • Cortex-M4 ARM processor.
  • 10-HP.
  • Current consumption: +12V: 110mA ; -12V: 5mA.
Evolved from the oscillator mixing section of Mutable Instruments’ desktop hybrid synths, Warps is designed to blend and combine two audio signals.

A variety of wave-shaping and cross-modulation methods – some of them emulating classic analog circuits, some of them purely digital – are provided by the module.

With Warps, the cross-modulated sound can be sculpted with control voltages along 4 dimensions: by controlling the amplitude and distorting the input signals, by smoothly scanning through the collection of modulation algorithms, and by adjusting a timbre parameter controlling the brightness/harshness of the modulated signal.

Since many classic cross-modulation effects work best when the carrier is a simple waveform – for example, a sine wave for ring-modulation or a buzzing waveform for vocoding – Warps includes a digital oscillator offering a handful of classic waveforms. This internal oscillator, which tracks V/Oct and supports through-zero FM, will replace the carrier audio input – freeing up one oscillator in your system for other duties!

 


 

 

7 signal hybridization algorithms

  • Crossfade.
  • Cross-folding.
  • Digital model of an analog diode ring-modulator.
  • Digital ring-modulation.
  • Bitwise XOR modulation.
  • Octaver/comparator.
  • 20 band-vocoder.

Everything under CV control

  • CV control of modulation algorithm selection, with crossfading between adjacent algorithms.
  • CV control of each input’s amplitude, with emulated analog saturation.
  • V/O CV control of the internal oscillator (when enabled).
  • For each algorithm, CV control of timbre richness/brightness/distortion.
Built in carrier oscillator

Audio input 1 can be replaced by an internal digital oscillator with through-zero FM.

Available waveforms: sine, triangle, sawtooth, pulse, filtered noise.

Specifications

  • Input impedances: 100k.
  • Audio inputs and outputs: 16-bit, 96kHz.
  • CV inputs: 12-bit, 1.6kHz.
  • Internal processing: 32-bit floating point, 576kHz (32kHz for the vocoder).

http://mutable-instruments.net/modules/warps

 

Kunder kjøpte også

Trykk Enter for å søke eller Esc for å lukke